Products
Contact Us

Address:2999 Tengfei Road, Weicheng District, Weifang, China

Fax: 0086-536-8169900

Email:

info@xinguangtech.com
alvin@xinguangtech.com 
clark@xinguangtech.com 
stephen@xinguangtech.com  
WhatsApp: 
alvin: +86-189 0536 1828 
Clark: +86-150 6564 6212
Stephen: +86-156 2176 8988

 


 
XMQ-1050FH Automatic die cutting and hot foil stamping machine with hologram
    XMQ-1050FH Hot foil stamping machine with hologram with three longitudinal axles + hologram (anti-counterfeiting trademark hot stamping)

    1. Four servo motor driven foil advancing shafts each individually programmable for short and long foil stepping 99 programmable short pull per shaft

    2. Each foil advancing shaft is equipped with a holographic foil print mark reading photo sensor.

    3. Industrial PC holographic foil stamping to print register system with manual register tolerance compensation device.

    4.Free standing operation console with industrial pc, Pro – Face touch screen and 12 thermometer for foil advancing step setting and temperature control with machine pre-heating timer

    5. Draw type foil roll bracket for loading foil outside at operation side

    6. Foil lead through bar

    7. 450 turning bar

    8. Foil splitting blade

    9. Heating base with 12 heating zone each temperature adjustable individually

    10. Foil breaking control

    11. Warning system for remaining foil

    12. Oil cooled tension control shaft

    13. Foil separating air blaster with air volume, blasting strength per zone and starting and ending time adjustment

    14. Thin paper stretching air blaster with air volume, blasting strength per zone and starting and ending time adjustment

    15. A/C motor driven inverter controlled brush rollers waste foil ejecting and foil tension system

    Specifications for heating unit:

    Number of heated zones

    : 12

    Temperature range

    : 0-2000C

    Power for heating

    : 24 KW

    Total powerv

    : 44 KW

    Specifications hot foil stamping unit:

    Foil advancing shaft (each with a hologram

    foil print mark reading photo sensor)

    :4

    Maximum capacity foil diameter

    :Ø 200 mm

    Foil core diameter

    :1² or 3² 

    Maximum capacity rewind diameter (optional)

    : Ø 200 mm

    Maximum foil and stamping size

    :730 x 1020 mm

    Maximum foil stamping speed

    (subject to paper, foil and stamping die quality as well as operator’s skill)

     

    Foil pull length < 200 mm         Foil width 100 mm

    :6000 sheets/h

    Foil pull length < 300 mm         Foil width 100 mm

    :5000 sheets/h

    Foil pull length < 600 mm         Foil width = 150 mm

    :4000 sheets/h

    Foil pull length 600 - 700 mm   Foil width = 150 mm

    :3500 sheets/h

    The max. mechanical speed is also 7500 Cycles/H

     

    Maximum hologram foil stamping speed

    (subject to paper, foil and stamping die quality as well as operator’s skill)

     

    Foil pull length 100 mm         Foil width 40 mm

    : 5000 sheets/h

    Foil pull length 300 mm         Foil width 40 mm

    : 4000 sheets/h

    Foil pull length 500 mm         Foil width 40 mm

    : 3000 sheets/h

    Hologram stamping accuracy

    (subject to paper, foil and stamping die quality as well as operator’s skill)

    : + 0.3 mm

    Minimum foil width

    :45mm

    Number of heated zones

    :12

    Temperature range

    :0-200°C

    Power for heating

    :24 KW

    Specifications of paper stock range:

    Maximum sheet size

    : 1050 x 750 mm

    Minimum sheet size

    : 400 x 370 mm

    Processable materials

     

    1. Paper (depending on quality), min.

    : 80 – 90 g/m2

    2. Carton (depending on quality), up to

    : 600 g/m2

    3. Corrugated board (Fine), up to

    : 4 mm

    (*) Admissable undulation: 4% of the sheet width

     

    Minimal gripper edge

    : 9mm

    Specifications for die cutting:

    Maximum die cutting size

    :1040 x 720 mm

    Inner size of chase

    :1145 x 755 mm

    Dimensions die cutting plate

    :1080 x 736 mm

    Maximum die cutting pressure

    : 300 T

    Maximum mechanical speed

    : 7500 cycles/hour

     General specifications:

    Power supply for main motor

    : 11KW.

    Power supply for other motors

    : 9 KW

    Total power supply including heating

    : 63KW.

    Power voltage

    : 380V/3Phase/50Hz

    Pile height feeder, maximum

    : 1530 mm (incl. pallet)

    Pile height feeder with Non-Stop operation, maximum

    : 1130 mm (incl. pallet)

    Pile height delivery, maximum

    : 1300 mm (incl. pallet)

    Pile height over Non-Stop curtain maximum

    : 80 mm

    Total length (incl. preloading rails)

    : 7016 mm

    Total width (incl. catwalk)

    : 4049 mm

    Total height (incl. raise 200 mm)

    : 2167 mm

    Total weight

    : Approx. 17.5 ton

       

     

    Feeder Section

    * The four-suction- four-receiving feeder makes paper feeding smoothly, and  the height & angle of Suction nozzle can be
    adjusted.
    * Open-Close Trolley, Improve operational efficiency.
    * Tilting feeding table is more suitable for high speed transmission and positioning of Thin paper.
    * Non-stop transporting paper lifting device.
    * double sheet control unit.
    * pulling and pushing Dual-use side guide device for side positioning, which selected according to paper type, and switching easily.

       

     

     

    Feeding table

    * wool wheels &rubber wheel of delivering paper , which can be adjusted continuously, improve efficiency.

    *pulling and pushing Dual-use side guide device for side positioning, which selected according to paper type, and switching easily.

     

       

     

    Foil Stamping Section

    * Control System of the foil stamping section using the most advanced technology (same as BOBST),

    fully computer-controlled gold foil punching, Jumping steps programmed;

    * Air-Cooled-Foil-Go Strain Axis

    * Standard two-axis gold scroll that is , three vertical and two horizontal structure;

     

     

       

    Die-cutting Section:

    l Adopt central positioning system. It is very convenient and efficient to change the plate. The work efficiency can be improved greatly.

    l Adopt gear drive as main drive. It can keep much more stable drive and faster running speed.

    l Die-cutting frame with pneumatic locking system

     

       

     

    Delivery Section:

    · Adopt non-stop automatic delivery system and safety photoelectric device to ensure paper delivery in good order and convenient paper pile transfer.

     

     

     

    Main Driving System

    · Adopt warm wheel and worm gear

    · Adopt shell bearing connection.

    · Ensure smooth and steady operation

    · Ensure high pressure of die-cutting.

     

* Product:

* Name:

* Phone: E-mail:

* Consultation:

Services|About us|Certificates|Videos|Contact Us|Sitemap
Copyright © Weifang Xinguang Printing Machinery Co., Ltd. All Rights Reserved .